sara ramps eMail:info@sararamps.co.uk

Wheelchair trough ramps - Type ABS

Trough ramps offer an excellent balance between a very low weight and a high load capacity. Robust and easy to handle, these ramps are fabricated from an extruded profile which is cut to length and angled as required. With an internal width of 150mm and an overall width of 235mm, these ramps are ideal for wheelchairs even those with offset axles. Their profile allows tham to be stacked one inside the other for ease of storage and the 45mm high safety curbs on each side prevent any lateral slippage.

Foldable versions are available. This enables them to be stored and transported with the vehicle. (See below for further details.)

Click on small images to enlarge

Section details

Standard ABS ramp sizes

Length (mm)	Internal Width (mm)	External Width (mm)	Height difference 20% gradient (mm)	Capacity (kgs/pair)	Weight (kgs/each)
1000	150	235	165	700	5
1500	150	235	265	600	6
2000	150	235	365	500	8
2500	150	235	465	400	10
3000	150	235	565	350	12

Note: Non-standard sizes are generally no problem. Other dimensions available on request.

Single fold wheelchair trough ramps - Type ABS-F

Section details

Standard ABS-F ramp sizes

Length L (mm)	Length L1 (mm)	Length L2 (mm)	Internal Width (mm)	External Width (mm)	Height difference 20% gradient (mm)	Capacity (kgs/pair)	Weight (kgs/each)
1500	850	650	150	235	265	400	7
2000	1100	900	150	235	365	400	9
2500	1350	1150	150	235	465	350	11
3000	1600	1400	150	235	565	300	13

Bi-fold wheelchair trough ramps - Type ABS-Z

Section details

Wheelchair ramps

Standard ABS-Z ramp sizes

Length L (mm)	Length L1 (mm)	Length L2 (mm)	Length L3 (mm)	Internal Width (mm)	External Width (mm)	Height difference 20% gradient (mm)	Capacity (kgs/pair)	Weight (kgs/each)
2035	850	650	535	150	235	370	400	9
2785	1100	900	785	150	235	520	325	12
3535	1350	1150	1035	150	235	670	250	14

Note: Non-standard sizes are generally no problem. Other dimensions available on request.