 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Telephone: 01923 208888 eMail:info@sararamps.co.uk
Bridge Plates
|
|
 |
The AWB bridge plate is fabricated from aluminium plate with a five-bar tread non-slip surface. Designed for loading and unloading with sack trucks, pump trucks and roll cages. It is lightweight and easy to handle and comes with handle slots on either side. |
 |
Step ramp
The SB-K and SK is a sloping surface designed to butt up to steps. It is made from 5-bar aluminium tread plate which will not rust and has slot handles to make it easy to remove when not in use. It can be made to suit the height of any step. |
 |
There are 3 different types of small bridge plate. All are designed to span gaps where there is a very small difference in levels. They are fabricated from a single aluminium profile and are light and easy to handle. They can support greater weights than the sack truck bridge plates. |
 |
The model HF heavy duty bridge plate is fabricated from a 40mm thick aluminium honeycombe plate with non-slip surface. The bottom section includes a hinged lip to assist the passage of small wheeled trolleys and is fitted with a rubber profile to prevent any risk of slippage. |
 |
The mobile bridge plate, type MC is used specifically for loading and unloading shipping containers. The heavy duty combination of steel and aluminium ensures a strong construction for use in this tough environment. The foldable aluminium wedges guarantee capacities of up to 6 tonnes. |
 |
These aluminium pit covers make maintenance areas safe when the pits are not in use. They are manufactured in small lightweight sections to your pit configuration. The pit covers are available in capacities up to 4 tonnes. |
 |
With this 3-piece movable dock bridge plate, it is possible to overcome large height differences between dock and lorry. It comes with built-in forklift openings which make it possible to position the bridge whereever it is needed. |
 |
These wheel ramps are a good way to increase the height of low vehicles and make it safe to load and unload from a loading bay. They are lightyweight and are easy to move around using the castor fitted to the front plate. Robust and maintenance free, they are suitable for most vehicles. |
 |
The platform bridge plate is designed to eliminate minor height differences on a railway between the platform and the train. It is simple to use and when in the downward parked position the plate is unaffected by the passage of trains. |
|
There are drawbridge levellers to covers most loading applications. They can be used to bridge height differences of up to 250mm between dock and lorry, with a load capacity of up to 6000kgs. They are robust and maintenance freeand are available in static or sliding versions. |
